Material Group |
ISO Code |
Material Examples |
Finishing Cuts |
Medium Cuts |
Heavy Cuts |
Facing |
.1D Radial x 2D Axial |
.25D Radial x 1.5D Axial |
.5D Radial x 1.5D Axial |
.75D Radial x .25D Axial |
SFM |
IPM |
SFM |
IPM |
SFM |
IPM |
SFM |
IPM |
Steel | P | 1018 thru 1095, 12L14, A-36, Hot Rolled | 600 | 75.00 | 600 | 70.00 | 600 | 60.00 | 600 | 70.00 |
Steel Alloys | P | 4140 thru 8820 | 500 | 60.00 | 500 | 55.00 | 500 | 50.00 | 500 | 55.00 |
Steel Alloys < 45 HRC, Cobalt Chrome | 300 | 30.00 | 300 | 25.00 | 300 | 20.00 | 300 | 25.00 |
Tool & Mold Steels | P | H-13, O-1, A-2, D-2, S7, P20 | 250 | 40.00 | 250 | 35.00 | 250 | 30.00 | 250 | 35.00 |
H* | AR-450, Steels > 45 HRC | 100 | 8.00 | 100 | 6.00 | 100 | 5.00 | 100 | 6.00 |
Stainless Steel | M | 303,304, 316 | 450 | 45.00 | 450 | 40.00 | 450 | 35.00 | 450 | 35.00 |
410, 420, 440, 13-8, 15-5, 17-4 Ph | 350 | 40.00 | 350 | 35.00 | 350 | 30.00 | 350 | 35.00 |
High Temp - Titanium | S | 6Al4V, 5553, 99 | 200 | 15.00 | 200 | 12.00 | 200 | 10.00 | 200 | 12.00 |
High Temp - Nickel Based Alloys | S | Inconel 100, 718, Hastelloy-B, Rene 77, Jethete M252, Haynes 75 | 80 | 7.00 | 80 | 6.00 | 80 | 5.00 | 80 | 6.00 |
Inconel 625, Waspalloy | 120 | 10.00 | 120 | 8.00 | 120 | 7.00 | 120 | 8.00 |
Monel 400 | 250 | 16.00 | 250 | 12.00 | 250 | 10.00 | 250 | 12.00 |
High Temp - Iron Based Alloys | S | Aeromet 100, A286, Jethete M152 | 100 | 8.00 | 100 | 6.00 | 100 | 5.00 | 100 | 6.00 |
High Temp - Cobalt Based Alloys | S | Kovar, L-405, L-605, Stellite SF12 | 70 | 6.00 | 70 | 5.00 | 70 | 4.00 | 70 | 5.00 |
Iron | K | Gray Cast, Malleable, Ductile | 600 | 75.00 | 600 | 70.00 | 600 | 60.00 | 600 | 70.00 |
Material Group | ISO Code | Material Examples | Cutting Diameter |
1/8 |
3/16 |
1/4 |
3/8 |
1/2 |
5/8 |
3/4 |
1 |
Steel | P | 1018 thru 1095, 12L14, A-36, Hot Rolled | 0.0007 | 0.0010 | 0.0020 | 0.0030 | 0.0040 | 0.0050 | 0.0060 | 0.0070 |
Steel Alloys | P | 4140 thru 8820 | 0.0005 | 0.0007 | 0.0015 | 0.0020 | 0.0030 | 0.0040 | 0.0050 | 0.0060 |
Cobalt Chrome | 0.0008 | 0.0010 | 0.0020 | 0.0030 | 0.0050 | 0.0070 | 0.0080 | 0.0100 |
Steel Alloys < 45 HRC | 0.0003 | 0.0003 | 0.0005 | 0.0008 | 0.0010 | 0.0015 | 0.0020 | 0.0030 |
Tool & Mold Steels | P | H-13, O-1, A-2, D-2, S7, P20 | 0.0005 | 0.0010 | 0.0015 | 0.0020 | 0.0030 | 0.0040 | 0.0050 | 0.0050 |
H* | AR-450, Steels > 45 HRC | 0.0002 | 0.0003 | 0.0005 | 0.0008 | 0.0010 | 0.0015 | 0.0020 | 0.0030 |
Stainless Steel | M | 303,304, 316 | 0.0007 | 0.0010 | 0.0015 | 0.0020 | 0.0030 | 0.0040 | 0.0050 | 0.0060 |
410, 420, 440, 13-8, 15-5, 17-4 Ph | 0.0005 | 0.0008 | 0.0010 | 0.0015 | 0.0025 | 0.0030 | 0.0040 | 0.0050 |
High Temp - Titanium | S | 6Al4V, 5553, 99 | 0.0005 | 0.0008 | 0.0010 | 0.0012 | 0.0015 | 0.0020 | 0.0030 | 0.0040 |
High Temp - Nickel Based Alloys | S | Inconel 100, 718, Hastelloy-B, Rene 77, Jethete M252, Haynes 75 | 0.0005 | 0.0007 | 0.0010 | 0.0015 | 0.0020 | 0.0025 | 0.0030 | 0.0030 |
Inconel 625, Waspalloy | 0.0005 | 0.0007 | 0.0010 | 0.0015 | 0.0020 | 0.0025 | 0.0030 | 0.0030 |
Monel 400 | 0.0005 | 0.0010 | 0.0015 | 0.0020 | 0.0025 | 0.0030 | 0.0040 | 0.0050 |
High Temp - Iron Based Alloys | S | Aeromet 100, A286, Jethete M152 | 0.0005 | 0.0007 | 0.0010 | 0.0015 | 0.0020 | 0.0025 | 0.0030 | 0.0030 |
High Temp - Cobalt Based Alloys | S | Kovar, L-405, L-605, Stellite SF12 | 0.0005 | 0.0007 | 0.0010 | 0.0015 | 0.0020 | 0.0025 | 0.0030 | 0.0030 |
Iron | K | Gray Cast, Malleable, Ductile | 0.0050 | 0.0007 | 0.0010 | 0.0015 | 0.0020 | 0.0030 | 0.0040 | 0.0050 |